Book Now!

 

This article down below relating to What Would Cause My Electric Water Heater to Stop Working? is immensely interesting. You should read it.

Lots of contemporary homes take advantage of an electric hot water heater for their furnace, due to its convenience and simplicity of use. However, just like any other electric appliances, problems may arise with its usage, unexpectedly. It can be actually frustrating to awaken to a chilly shower rather than a hot one or having your bathroom with water that isn't hot adequate and even also hot. Whatever the instance may be, water heater troubles can be rather stressful. Fortunately, we've made a listing of possible remedies to your water heater concerns. There are a number of aspects that might trigger much of these troubles, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the main power supply for safety and security. Whatever the issue is, getting it repaired should not position way too much of an issue if you adhere to these actions:

 

Examine Your Power Supply:

As standard as this may seem, it is extremely needed. Without sufficient power, your water heater will certainly not function. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, just turn it on and off once more. Replace any type of broken or worn-out fuse. Check the appliance with power after these adjustments to see if it's now functioning.

 

Check the Heating Element in the Hot Water Heater:

If it's not a power problem, then try taking a look at your burner if it is still working. Check each of your heating elements to make sure the trouble isn't with any one of them. If any of them is faulty, replace that part and after that examine whether the warm water is back on.

 

Check Your Thermostat:

If your water heater still isn't functioning or the water appearing isn't hot enough, you may require to inspect the temperature level settings on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open up the accessibility panel as well as press the red switch for temperature reset over the thermostat. This must assist heat up the water. Transform the circuit breaker back on and examine if the trouble has been solved.

 

Call An Expert:

If after changing all damaged parts and also resetting your temperature, the hot water heater still isn't functioning, you may need to speak to a professional plumber for a specialist point of view. The trouble with your heater could be that the cold and hot taps have been switched over or it may be undersized for the amount of warm water required in your home. Whatever the instance might be, a professional plumber would certainly help solve the trouble.

 

Final thought

Water heater troubles are not always major. Most of them are due to small issues like a blown fuse or worn-out heating element. Replacing the defective parts ought to work. Nevertheless, if you are still not able to resolve the problem, give a call to your closest plumber to come to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We had been shown that article on Hot Water Heater Repair from an acquaintance on our other web address. Please take the opportunity to distribute this post if you enjoyed reading it. I enjoy reading our article about What Would Cause My Electric Water Heater to Stop Working?.

Call Today